Belly boats (or float tubes) offer the perfect way to quietly fish lakes and ponds (duck hunters are discovering them, too). They’re also perfect for those who want to pack in to fish more remote waters and don’t want to hassle portaging a canoe or kayak.Read More
Fishing, Hunting and Outdoor Blog for Stories, Tips and Reviews
Fishing, Hunting and Outdoor Blog for Stories Tips and Reviews from Outdoor Men and Women.
Filtering by Category: Fly Fishing
Walter Foster has been painting and drawing since he was a young kid growing up in a small town in Vermont, where he explored the small streams around his home, catching wild trout.Read More
One of the reasons I love fly fishing is as it’s a year round undertaking. Even throughout the coldest months of the year you can discover actively feeding fish, and also you don’t have to race to the water hours earlier than dawn for the fine action. Still, too many anglers put up their waders and stash their rods when wintry weather arrives.Read More
Pools can be as small as a bathtub in streams, and as big as a small lake in large rivers. But they all share similar characteristics. The three prime fish-holding areas in pools are the head of the pool where water enters, the tail of the pool where water begins to speed up as it enters the pool exit, and the main current flows in the body of the pool.Read More
One of my most beloved angling traditions is the lunchtime beer. The midpoint of a float trip is largely an excuse to open a can of Miller Lite. If the morning has been a good one, then it’s a well-earned celebration. If the fishing has been off, then it’s a commiseration with your own bad luck–and just as well-deserved.Read More
By: Zach Matthews
Fly-casting is not easy. Like any skill worth knowing, casting expertise takes a long time to develop—in some cases years. The good news is that anglers pretty much make the same mistakes, and that means your casting flaws have probably already been tackled by someone before. Of all the ways we casters foul up the presentation of our flies, these five stand out. They are the most common, and the fixes for them offer you the biggest results once you make the necessary tweaks to your stroke.
The Dreaded Tailing Loop
All fly casts unroll in a “loop,” which has a top leg and a bottom leg. Normally, these loops stay open, like a stretched-out letter C, with the bend unrolling toward the target. The legs of the loop do not cross.
“Tailing loops” occur when the top leg of the loop drops below the bottom leg as the cast unrolls, making a closed loop. As the cast unrolls, this closed loop often tangles when the top leg of the loop tries to turn over and gets snagged on the bottom leg of the loop. Tailing loops are the true cause of what we euphemistically call “wind knots.”
Normally, when the angler pushes the rod forward into the forward stroke, the tip top guide of the rod will track a straight, horizontal line a few feet above the angler’s shoulder. Tailing loops form when the tip top guide instead dips down in the middle of the forward stroke, forming a U-shaped or “concave” path as the angler pushes the rod forward. When the tip top guide drops, it drags the top leg of the loop down with it, imparting the classic tailing loop shape. Two things actually cause the tip top to drop: “punch” and “creep.”
“Punch” occurs when the angler gets excited and hammers his rod forward, often holding the rod upright like the angler was delivering a punch with a closed fist. The sudden application of forward power flexes the rod into a bend, which pulls the tip-top guide downwards—a problem exacerbated by the angler’s death grip holding the rod high in the sky. When the angler finishes his forward stroke and releases the pressure, the rod rebounds, springing the tip top skywards and creating the U-shaped path. The fix for “punching” anglers is to settle down. Focus on applying power evenly as the rod strokes forward, with the greatest power applied right before the rod comes to a stop. Be sure to rotate the wrist into the forward stroke, pointing the thumb a few feet above the target. The easiest way to practice this fix is to try to throw the slowest loops you can. “Punchy” anglers often cast as hard as they can in a misguided effort to get the fly out there.
“Creep” is a little more insidious. The proper way to make a backcast is to accelerate the hand backwards, then stop and keep the hand fully extended at the back of the cast until the backcast finishes unrolling. That way, when the angler starts his forward cast, his rod will be in position to immediately “catch” all the energy of the backcast and convert it into “load” or power for the forward cast. An angler who “creeps” is unknowingly allowing his rod hand to drift forward while his backcast is still unrolling behind him. When the tip top guide drifts forward, the rod ends up being held vertically, like an antenna on an old truck. As soon as the backcast finishes unrolling, the rod catches that force as a hard jolt. This jolt flexes the rod and drags the tip top guide downward into the classic U-shaped path, just as the angler tries to make his forward cast.
The fix for creeping anglers is twofold: first, get a friend to record your cast on video, shot from the side. Creeping anglers rarely believe they are doing anything wrong (denial is the first stage in any recovery, after all). Second, open your stance up a little bit and stand slightly sideways, so you can turn your head and look behind you. Wait for the visual cue of seeing the backcast finish unrolling and mentally note the sensation of the rod when it receives the backcast load. Only then start your forward stroke. Done properly, the load on the tip top guide will remain consistent as you push forward, preventing the U-shape and, ultimately, the tailing loop. Once you are very familiar with the sensation of the rod receiving the backcast load, you can square your stance back up, if that is more comfortable.
Front and Back Fly Fishing Casts Out of Plane
An angler once asked me to diagnose the reason why he could never get his cast out beyond forty feet, even though he knew how to double haul. We went to a field, laid a long rope on the grass in a straight line, and I stood in front of him at seventy feet while he casted straight at me. Within seconds I knew the problem. The angler’s backcast was out of plane with the forecast, meaning his backcast loop was shooting out to the side (by a significant amount). Out of plane casts sloppily spray force all over the place, swinging the rod sideways like a golf club, instead of loading it in a straight, clean bend, like a bow and arrow.
I asked the angler to open his stance up so he could turn his head behind him, and focus on keeping the backcast loop directly over the rope, which made a nice straight line into the distance. He did so, and on his very next cast he shot his yarn fly right over my shoulder, adding thirty feet to his cast with one simple change.
Out-of-plane casts are easy to diagnose because they cause the fly to kick sideways when the casts turns over. If your fly is consistently landing with a 90-degree bend in your leader, your casts are out of plane. Turn your head and pick out a spot directly behind you, opposite your target, and line up the front and back casts. This fix is usually as simple as recognizing the issue, and most anglers can correct it right away.
Double Hauling from Your Hip
Most anglers over-estimate the advantages of the double haul and underestimate the drawbacks of out-of-plane casting. Nonetheless, the double haul is the key to both control on windy days and to true distance casts over eighty feet. Learning the double haul is a step on the path to becoming a complete angler, but too many of us learn the technique badly.
The most common double-hauling error is hauling from the hip, rather than from the base of the rod. Properly, the double haul should begin with your hands close together and the line hand near the butt of your rod. As the rod moves into the backcast stroke, the line hand should haul down a few inches—then return to the butt of the rod, in some cases moving back up by the angler’s head. This is the part many anglers neglect; instead, they correctly haul away from the rod, but then let their line hand drift down by their hip, dragging feet of slack across their chests as they wait for the backcast to finish unrolling. When the time comes for the forward haul, they are mostly pulling on slack, and their line hands have nowhere further to go anyway.
The key to the proper forward haul is to let the backcast draw your line hand along with it as it shoots backwards, thus pulling your hand into position back up by the butt of the rod. If the haul into your forward cast starts with a tight, short length of line and your hands start out close together, the amount of force you can generate will be massively increased. Your hauls will be more effective—especially in punching into wind, and as an added bonus, your hauling hand won’t be trying to pull your rod sideways and thus out of plane.
Failing to Shoot Line
Almost every angler knows the concept of shooting line, but a surprising number of us think this fundamental casting technique is only for distance casting. Shooting line—allowing a weight-forward line’s head to tug the thin running line out through the guides as the cast unrolls forward—will not only make you more accurate, but will also leave you less tired. Shooting line dampens the effects of turnover, softening the forces that cause the fly to slap the water as it unrolls and making for a more delicate (and quieter) presentation. In distance-casting or saltwater applications, shooting line is absolutely necessary, as few anglers can “carry” eighty feet or more of line in the air.
A lot of anglers avoid shooting line because they dislike having tangles of running line at their feet. You can correct this with some basic line management. First, always keep your running line wet; in a boat you can throw down a wet towel or splash some water onto the floor or line tray. Wet running line is less apt to snag itself and form a knot. Second, always stretch your running line when you first pull it from the reel. Simply grab two points of the line a few feet apart and gently pull it like you were pulling out a piece of taffy. Work your way down the line until it is all stretched. Finally, stack your line in an orderly pile. Running line tangles when loops at two different parts of the line cross over each other. This forces the nearer loop to slide out from under the further loop as you shoot out line, often resulting in a knot.
To prevent this, stack the line from the back of the line to front as you lay it down. This means the most distant part of the line (the part that actually contacts the reel) should be laid on the ground first, with loops closer to the tip of the line stacked, in order, on top. If you make a habit of this as you retrieve line, the line will almost always shoot cleanly, because the front-most part of the running line will always be at the top of your pile.
There comes a point in every angler’s life when he decides to try for the big cast, throwing the fly as far as he possibly can. Most of the time, this attempt fails, because the fly fails to turn over and “crashes” while the line is still formed into a loop, instead of unrolling all the way to the fly.
Two things cause fly casts to crash: first, the cast lacks sufficient power to turn over the fly. Second, the shooting line can overrun a wind-resistant fly, even when the power to turn over the cast might have been there.
If you lack sufficient power to deliver that fly as far as you want to deliver it, you may not have enough rod. Five weights wilt when you ask them to throw huge saltwater flies at huge saltwater distances. Often though, the problem is not your gear, but you. Seeing a cast crash out should prompt you to review your checklist of casting errors to see if any of them might be monkeying with your delivery. Are you throwing a tailing loop? Are your front and back casts in plane? Are you hauling from the hip? Ultimately, all of us could stand to get better at these fundamentals – even the best casters in the world. You can make an old fly line into your “grass line” and practice with it in any open area. Just tie a piece of yarn to the end to serve as a practice fly.
Practice on the lawn is a great long term cure for crashing casts, but it won’t solve the problem right now, and that’s where the final tip comes in. Sometimes you just need the added inertia of the cast hitting the end of the line to force the last bit of energy into the fly and cause it to turn over. Some anglers practice what they call a “triple haul,” imparting a small tug to the line just as the fly turns over to make sure the cast straightens out. This is difficult to do when you’re shooting lots of line, because you may not keep your hand on the running line as it flies through the guides. However, you can duplicate the effect by tucking a loop of line (from the section nearest your reel) into your pocket or under the belt of your waders. As the cast finishes unrolling it will tighten up against the loop you tucked away, plucking it free but giving just enough tug to help the cast straighten out.
This article first appeared in Orvis News
Dry fly fishing is all at once the foundation, Holy Grail, and most difficult aspect of fly fishing.Read More
Recently I’ve been amazed by the number of flies and rigs that anglers have left hanging on streamside trees and bushes. On one stretch of water that I frequent on a weekly basis, I’ll usually see a number of hanging patterns, so I wade across the stream and cut them free.Read More
Walk into any fly shop from the Rockies to the Catskills and you’ll see a wall or two full of trout rods. Most shops carry a half-dozen brands at least, and the prices range from the bare-bones value of rods like the ECHO Base, all the way to the pricey G. Loomis Asquith. I’ve spent my entire life chasing trout in the American West, and I’d like to think I know a thing or two about “good” trout rods.Read More
Last year featured our first extended fly fishing seasons in Wisconsin. Early trout fly fishing season here opens on the first Saturday of January, and you can now fish through to the 15th of October. For many years, our season typically ended September 30th, but state fisheries biologists determined that our spawning trout would not be adversely effected by adding 15 days to season.Read More
Michigan is an iconic trout state with some very famous rivers. For every one of those world renowned flows, however, there are dozen of lesser known—yet equally fishy—rivers. Guide Brian "Koz" Kozminksi of True North Trout Guide Service knows a staggering amount of these "sleepers" like the back of his hand.Read More
Round up the family, pack the bags we're are going to Estes Park, Colorado.
If you are reading this article, it’s likely because the title caught your attention. If it did, there’s a great chance you’re just like me—you love the outdoors. Hunting, fishing, camping and adventures all get you excited. If so, I have the perfect vacation for you!Read More
Fly Fishing the Yellow Conehead Woolly Bugger whistles by my ear and plunks in the river on the far side of a white plume. At the end of the swing, it glides into the slack water around my feet. A crimson blur flashes toward it—a brook trout trying to chase an intruder from the eddy.Read More
What makes for a successful day fly fishing? A friend of mine shared some sage wisdom: a successful day on the river can be defined by how much fun the angler had. Sometimes I need to check my own expectations when I am out enjoying day on the water.Read More
I’ve had a running debate about which tastes better: an ice-cold Kalik after a day of fly fishing forbonefishing in the Bahamas or an ice-cold Labatt’s Blue after an evening of bugging for smallmouth in Ontario.Read More
At this time of year I start thinking of new tackle I may need for the up coming fishing season. It may be that I have some extra Christmas money to spend but mostly its wishing it was Spring and I could be heading out to one of my local spots to wet a line.Read More